technical data sheet sma straight plug 32S101-270L5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/08.13/6.1 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 60169-15, en 122110, mil-std-348 documents assembly instruction 32 a material and plating connector parts material plating center contact brass aurodur?, gold plated outer contact cube or equiv. aurodur?, gold plated coupling nut cube or equiv. gold, 0.1 m min. dielectric ptfe gasket silicone
technical data sheet sma straight plug 32S101-270L5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/08.13/6.1 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data impedance 50 w frequency dc to 18 ghz vswr 1.05 + 0.01 x f [ghz] insertion loss 0.03 x [ghz] f db insulation resistance 3 5 g w center contact resistance 3 m w outer contact resistance 2 m w test voltage (at sea level) 1000 v rms working voltage (at sea level) 480 v rms power handling (at 20 c, sea level, vswr 1.0) 200 w @ 2 ghz rf-leakage 3 100 db @ dc to 1 ghz - limitations are possible due to the used cable ty pe - mechanical data mating cycles 3 500 coupling nut retention 3 270 n coupling test torque 1.7 nm recommended torque 0.8 nm to 1.1 nm environmental data temperature range -65 c to +165 c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 rohs compliant tooling n/a suitable cables ut 47 weight weight 5.10 g/pce draft date approved date rev. engineering change n umber name date rong fang 27.03.14 j_krautenbacher 21.07.16 f00 15 -1629 i_wallner 21.07.16 while the information has been carefully comp iled to the best of our knowledge, nothing is inten ded as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
